Jining Huade Environmental Protection Energy Technology Co., Ltd.

Centrifuge maintenance, centrifuge dehydrator maintenance, Jining Huade Environmental Protection Energy Technology Co., Ltd. Jining Huade Environmental Protection specializes in repairing decanter centrifuge dehydrators, with many years of maintenance experience, customers are welcome to come for consultation
. Maintenance of centrifuge
Use water or mild detergent to clean the rotor chamber and rotor. Do not use alkaline solutions or solvents that are abrasive to materials.
Use a rag or tweezers to remove any debris from the rotor chamber.
When the centrifuge is not in use, open the top cover and keep the rotor chamber dry to avoid wear of the motor bearings.
Special safety protection measures must be taken when handling toxic, radioactive or contaminated samples.
. Maintenance of centrifuge accessories
If the centrifuge tube shows color change, deformation, leakage, etc., it must be stopped.
When performing high-temperature and high-pressure sterilization of centrifuge tubes, do not screw on the tube cap to avoid deformation of the tube. The sterilization temperature resistance of each centrifuge tube is listed in this section of the user manual.
Try to keep a certain distance between the centrifuge and other electrical equipment, have good grounding measures, and conduct regular inspections.
The centrifuge and rotor must not be exposed to high-intensity radiation or prolonged heating. Use neutral detergent when cleaning.
The rotor can be replaced if necessary. After reinstallation, tighten the swivel screws.
.Rotor pin
The rotor pin needs to be lubricated regularly with lubricating oil to ensure the smooth operation of the centrifuge.
.Condenser maintenance
The condenser is used to cool the refrigerant. It is installed at the rear of the centrifuge and uses air cooling.
The condenser should be cleaned of dust regularly to avoid obstruction of heat transfer. Use compressed air to purge this area.
.Sterilization and disinfection of the rotor cavity and accessories
All conventional disinfectants can be used. Since centrifuges and accessories are made of different materials, disinfectant compatibility must be taken into consideration.
.Operational inspection
The operator should ensure that the important parts of the centrifuge are intact, mainly referring to:
.The motor suspension is stable
.The rotating shaft has no deviation
.The rotor and accessories are not corroded
.Tighten the screw connection.
In addition, the ground wire must be checked regularly.
Jining Huade Environmental Protection specializes in providing domestic and imported centrifuge repair and centrifuge maintenance services. It is a professional centrifuge repair manufacturer. The centrifuge repair price is fair and reasonable. The company provides centrifuge managed services, second-hand centrifuge remanufacturing and centrifuge accessories. The company specializes in maintenance: imported centrifuges such as Flottweg, Alfa Laval, Westfalia, ANDRITZ, Ishikawa Island, Basin Industry, Beares, etc. Maintenance of domestic centrifuges such as Haishen Electromechanical, Green Water, Shangcentrifuge, etc. Repair business of imported water pumps such as Flygt, KSB, Albus, Hyster and Grundfos
Consultation hotline:
Telephone:
:
Company name: Jininghua De Environmental Protection Energy Technology Co., Ltd.
Company address: Liying Subdistrict Office, Rencheng District, Jining City, Shandong Province (in the courtyard of Jining Jinyu Warehousing Co., Ltd.)